TextSpeak Notify!’s Industry-First earBridge Text to Speech Amplifiers are the physical connection between your Notify! System and your your on-premise speakers and audio systems. They enable your Notify! System to integrate with paging amplifiers via a line-out audio connection or connect directly to speakers with up to 25W of power. With the industry’s first embedded Text to Speech engine and support for pre-recorded audio files and live voice broadcasts, you can deliver any message you can think of with just a few taps on the Notify! Mobile Apps.

After you receive your earBridge Device and set it up on your network or via Cellular, you will need to register it with your Notify! System to begin sending messages.

Adding An earBridge Device To Your System:

1. Navigate to the “Destinations” Page
2. Select the “Devices” Tab
3. Click on the “+” button to add a Device.

1. Give the device a name that will be clear to users where it is location and what it will be used for.  i.e. “Lobby Speakers”
2. Select the device type
3. Enter the MAC ID listed on the device for Ethernet/WiFi or the IP Address Listed on the Cellular Product.
4. Select “Add” To Save the Device

Refer to the appropriate manual for your earBridge device for network and speaker setup instructions.

To Remove A Device From Your System:

1. Navigate to the “Destinations” Page
2. Select the “Devices” Tab
3. Click on the “Trash Can Icon” for the device you want to remove.

Note: You may get a warning that the device you are trying to remove is assigned to messages or included in groups. You must first remove the device from those assignments before removing the device from the system.